 |
 AutoShoe
General Information |
Everyone knows that the best way to prevent
chatter marks
in a profile is to have a pressure shoe contoured
to match the profile......
So why
don't more
people do it?? |
|
 |
The answer is obvious,
cost or time involved. There are various ways to
achieve an exact reverse profile:
- One method is to make a reverse template, grind
reverse knives, then setup the moulder and run a
few feet of reverse profile...very time
consuming!
- You could buy the custom made shoe or use a
standard flat hold down and risk having a rub mark
on the moulding.
|
Now... there is no reason
for not having a counter profile pressure shoe.
 |
Not only does the AutoTemp system make perfect
templates, now it makes perfect pressure
shoes. What is even better is that it works from
exactly
the same drawing you used for the
template. Just finish cutting the template, slide
the clamping system out of the way and insert the
block, insert the correct cutter in the router and
enter the 3 or 4 parameters for cutting the shoe
and walk away. While you are grinding the knives,
the machine is making your perfect pressure shoe.
By the time the knives are ready, the pressure
shoe will be ready too, matching the template,
knives, and original wood sample perfectly.
|
|
Now you can watch a
video clip of the
AutoShoe in action!
The video shows
the AutoShoe operating on the AO810 machine. The
system is also available for the AO812 machine.
|
We sell the AutoShoe program as part of the
complete system including the clamping, bits
and everything you would need to start
making custom pressure shoes. The system
cost depends on the machine you currently
are using.
The AutoShoe program is an integrated part
of the AutoTemp program. To have the
AutoShoe program, you must have the AutoTemp
program. |
 |
|
AutoShoe Option
1 - $CALL
For
existing users of the AutoTemp machine or
customers
purchasing a new machine.
Includes the following: AutoShoe program,
Clamp base-plate, 2 - 1/8" Ball-Nose Bits, ¼" Collett & (3) 3½" blank
shoe blocks. |
|
AutoShoe Option
2 - $CALL
For
customers using the Pro-Template System
Includes the following: AutoTemp program,
AutoShoe program, Clamp Bars, Clamp
base-plate, 2 - 1/8" Ball-Nose Bits, ¼" Collett & (3) 3½" blank
shoe blocks. |
|
|
|
|
If you have any questions on any of our services, call us
Toll Free at 800.759.6268,
email
us, or use our
Online Request
Form to tell us how we can assist you. |
|
